Hybrid wood consists partially of wood, and partially of different coloured acrylic resins. They are merged (cast) in a special process. The resulting hybrid material can be processed easily and is dimensionally stable. You may need to sharpen your tools quite often. In order to achieve great visual effects, partly ground mother of pearl shell is used, which can blunt sharp cutting tools faster than usual.
The wooden part of this block has been stabilized with Plexiglas® (PMMA) and fully penetrated. It will no longer absorb water, is dimensionally stable, and will no longer crack. It can be easily worked, but it does not react well to excessive heat during processing, so take care when sawing, drilling and grinding. (When it gets very hot - the melt point is at 90 Celsius - the PMMA begins to smear.)Very easily worked with sharp tools, but the odor stays within limits and is negligible. The stabilizing gives this block excellent hardness, durability, and stability. It is therefore suitable for heavy duty applications or in areas that get wet, such as outdoors.
We have produced the blank offered here for you using a complex process in our own production.
The Amboyna (Pterocarpus indicus) probably gets its name from its prevalence on the island of Ambon in Indonesia. It is a species of padauk tree, which are not exactly rare and even extend as far as Africa. However, the 3-dimensionality and distinctive beauty of the Amboyna is second to none. Moreover, since it has a quite faultless burl, amboine is a highly coveted veneer wood and is used, for example, on Rolls Royce fittings.
Dimensions: approx. 150 x 22 x 22 mm
You will get the shown piece!
The piece is dry and can be processed immediately
Finely grained wood may contain imperfections such as open knots, bark inclusions, or cracks that are typical of the species. These flaws come from the way the tree has grown and are completely natural. They can usually be filled with low-viscosity cyanoacrylate (super glue) and wood dust.